Dead End Insulators with Aluminum or Stainless Steel End Fittings
The ARP-SK Series with aluminum or stainless steel end fittings is a 15–35 kV silicone dead end insulator for coastal and corrosive industrial distribution environments, sold and supported in Texas and Oklahoma by Ryan Sales.
- 15kV-35kV class
- aluminum or stainless steel end fittings
- specs match galvanized steel models
- silicone rubber housing
- boron-free E-Glass rod
Overview
For high-contamination and corrosive service such as coastal areas and industrial pollution zones, ARP offers its 15-35kV dead end suspension insulators with aluminum or stainless steel end fittings in place of galvanized steel. Electrical and mechanical performance matches the standard galvanized models, and the aluminum-fitting version is RUS accepted.
Specifications
| Voltage class | 15–35 kV |
|---|---|
| End fittings | Aluminum / stainless steel |
| Electrical and mechanical ratings | Match galvanized steel models |
| Insulation | Silicone rubber housing |
| Core rod | Boron-free E-Glass fiberglass |
| Certifications | RUS accepted (aluminum version) |
Ratings from manufacturer data. Confirm your configuration with a rep.
Applications
- Coastal, high-contamination and corrosive industrial distribution environments
Spec sheets & documents
Frequently asked questions
Who sells the ARP Dead End Insulators, Corrosion-Resistant in Texas?
Ryan Sales, a manufacturers' representative based in Magnolia, Texas, sells the ARP Dead End Insulators, Corrosion-Resistant and supports customers across Texas and Oklahoma through regional reps. Call (281) 363-1106 or request a quote on this page.
When should you choose ARP-SK dead end insulators with aluminum or stainless steel end fittings?
Choose them for high-contamination and corrosive service, such as coastal areas and industrial pollution zones, where aluminum or stainless steel fittings take the place of galvanized steel. The 15 kV to 35 kV units use a silicone rubber housing over a boron-free E-Glass rod.
How do ARP-SK dead end insulators with aluminum or stainless steel fittings compare with the galvanized steel models?
Their electrical and mechanical performance matches the standard galvanized steel models; only the end fitting material changes. They cover the 15 kV to 35 kV classes, and the aluminum-fitting version is RUS accepted.
Also in Polymer Insulators
View all →
ARP27kV Specialty Horizontal Dead End Insulator27kVCompact 27kV silicone polymer insulator that replaces two 10-inch porcelain disk assemblies in horizontal dead end applications.
ARP27kV Specialty Insulator with Clevis Pin27kVThe 27kV horizontal specialty polymer insulator supplied complete with ARP's clevis pin hardware.
ARPClevis Pin with Self-Contained Sliding Lock15kV - 69kV (insulator range)Clevis pin with a self-contained sliding lock for ARP dead end suspension insulators from 15kV to 69kV.