G&W Electric Representative in Texas & Oklahoma
Est. 1905 · Bolingbrook, IL
Ryan Sales is the G&W Electric representative for Texas and Oklahoma. We help utility, industrial and contractor engineers apply G&W switchgear, reclosers, protection, cable accessories and sensors, and we take G&W data center projects nationwide.
G&W Electric products
Padmount & Underground Switchgear
G&W ElectricGRAM Load Break Switchgear with Integral Ground15-38kVSF6-insulated load break switchgear that adds an integral ground position for safe cable grounding.
G&W ElectricLPFI Load Break and Fault Interrupting Switchgear15-38kVGas-insulated switchgear pairing load break switching with fault interrupting protection for underground distribution.
G&W ElectricModel T Load Break Switchgear with Integral Ground15-38kVCompact SF6 load break switchgear with built-in grounding capability for distribution circuits.
G&W ElectricPNI Load Break and Fault Interrupting Switchgear15-38kVPadmount SF6 switchgear combining load break ways and fault interrupting ways in one dead-front unit.
G&W ElectricPVI Load Break and Fault Interrupting Switchgear15-38kVSealed gas-insulated switchgear with integrated load break and fault interrupting for distribution circuits.
G&W ElectricRAM Load Break Switchgear15-38kVTotally sealed dead-front SF6 padmount and vault switchgear for three-phase distribution load break switching.
G&W ElectricRPFI Load Break and Fault Interrupting Switchgear15-27kVG&W's most compact and economical SF6 switch combining load break switching and 12.5kA fault interrupting.
G&W ElectricTFI / TVI / TNI / GNI Switchgear with Integral Ground and Fault Interrupting15-38kVFamily of SF6 switchgear models combining load break switching, fault interrupting and integral grounding.
G&W ElectricTrident-S Solid Dielectric Switchgear15-38kVSpring-assisted three-phase solid dielectric load break and fault interrupting switch with SafeVu visible break option.G&W ElectricTrident-SP Single Phase Switchgear15-27kVSingle-phase spring-assisted solid dielectric load break switch for underground distribution up to 27kV.
G&W ElectricTrident-SR Automation Switchgear15-38kVMagnetically actuated solid dielectric switchgear with 3.5-cycle operation built for distribution automation and automatic transfer.
G&W ElectricTrident-ST Solid Dielectric Switchgear15-38kVThree-phase solid dielectric switch with single-phase switched ways for underground distribution switching and fault interrupting.Current-Limiting Fuses & Protectors
G&W ElectricCLiP Current Limiting Protector2.8-38kVElectronically triggered current limiting protector interrupting up to 120kA in less than a quarter cycle.
G&W ElectricCLiP-LV Low Voltage Current Limiting Protector750VElectronically sensed low-voltage current limiter clearing faults up to 200kA in a quarter to half cycle.
G&W ElectricEncapsulated Current Limiting Fuses15-25kVSubmersible epoxy-encapsulated X-Limiter full-range fuses for padmount, vault and subsurface protection.
G&W ElectricHigh Current Limitersup to 38kVBackup current limiters with 120kA interrupting for series application with lower-rated interrupters.
G&W ElectricPower Assisted Fuses2.8-38kVCommutating current limiting fuses carrying up to 600A continuously with 40-60kA interrupting.Reclosers & Overhead Switches
G&W ElectricDiamondback Solid Dielectric Load Break Switch15.5-38kVPole-mounted three-phase solid dielectric load break switch for overhead sectionalizing and automation.
G&W ElectricViper-HV Sub-Transmission Recloser72.5kVThe world's first 72.5kV solid dielectric pole-top recloser bringing substation-class protection to sub-transmission lines.
G&W ElectricViper-S Three-Phase Recloser12.1-38kVMechanically ganged three-phase solid dielectric recloser for synchronized feeder protection.
G&W ElectricViper-SP Single-Phase Recloser15.5-38kVMaintenance-free single-phase solid dielectric recloser for overcurrent protection on single-phase circuits.
G&W ElectricViper-ST Recloser15.5-38kVIndependent pole-operated solid dielectric recloser with flexible single-phase or three-phase trip and lockout modes.Separable Connectors & Elbows
Cable Splices & Terminations
G&W ElectricCapnut and Sodertite Terminationsup to 35kVField-assembled porcelain terminations for three-conductor and specialty distribution cable.
G&W ElectricPAT Style Slip-On Terminations15-46kVFactory-assembled porcelain slip-on terminations with built-in stress relief - no hot compound pouring.
G&W ElectricPILC Splice Kits and Transition Jointsup to 35kVSplice kits and transition modules connecting paper-insulated lead cable to modern extruded cable.
G&W ElectricPre-Molded PM Series Cold Shrink Accessoriesup to 35kVCold shrink premolded terminations and accessories for distribution cable up to 35kV.Transmission Cable Accessories
G&W ElectricATA/ATL Outdoor Terminationsthrough 345kVOutdoor terminations for self-contained fluid-filled and pipe-type transmission cable systems through 345kV.
G&W ElectricLPP Jointsthrough 345kVCable joints for self-contained and pipe-type transmission systems through 345kV.
G&W ElectricPAT130C Dry Type Outdoor Termination110-145kV IEC / 115-138kV IEEEPremolded dry-type outdoor termination for 115-138kV solid dielectric cable with mechanical shrink installation.
G&W ElectricPython Outdoor PAT Style Termination72.5-362kV IEC / 69-345kV IEEEPorcelain-insulated outdoor terminations for solid dielectric transmission cable through 345kV.
G&W ElectricPython PATR Style GIS and Transformer Terminations72.5-362kV IEC / 69-345kV IEEEGIS and transformer-compatible terminations for solid dielectric transmission cable.
G&W ElectricPython Premolded Joints72.5-550kV IEC / 69-500kV IEEEFactory-molded, 100% routine-tested splices for XLPE and EPR transmission cable through 500kV.
G&W ElectricSSC160 Plug-in/Plug-out Dry GIS and Transformer Terminationup to 550kV IEC / 500kV IEEEDry, plug-in/plug-out GIS termination with visual disconnect that prevents accidental disconnection through 500kV.
G&W ElectricTJNT140 Transition Jointsthrough 138kVTransition joints connecting dissimilar transmission cable systems through 138kV.Voltage & Current Sensors
G&W ElectricAccusense Combined Current and Voltage Sensorsup to 27kVCombined current and voltage sensors using Rogowski coil technology for metering-class grid measurement.
G&W ElectricAccusense Voltage Sensorsup to 38kVHigh-accuracy low-power voltage sensors for outdoor, indoor and underground medium-voltage monitoring.Distribution Automation
G&W ElectricAutomatic Source Transfer5-38kVAutomatic transfer solutions that switch critical loads to an alternate source on loss of voltage.
G&W ElectricCentralized Software-Based AutomationDistribution systemsServer-based LaZer grid automation software for centralized FLISR, CVR and Volt/Var optimization.
G&W ElectricFault Location Isolation and Service Restoration5-38kVFLISR systems that detect, isolate and restore around faults in seconds instead of hours.About G&W Electric
G&W Electric is a Bolingbrook, Illinois manufacturer of power grid equipment that opened its doors in 1905. Its firsts include the first disconnecting porcelain pothead, the first fully submersible switchgear and the first visible break solid dielectric switchgear.
Why buy G&W Electric through Ryan Sales
G&W Electric is the reason Ryan Sales exists. Jack and Piper Ryan founded the company in The Woodlands in 1984 specifically to sell G&W Electric in Texas, and the line has been at the center of the business for more than 40 years. Their two sons, both engineers, are now part of the management team.
- Application help. We help compare solid dielectric with air or SF6 designs, size fault interrupting ratings and pick the right recloser or automation scheme.
- Factory access and lead times. We connect your engineers with G&W application teams and get current factory lead times.
- Regional reps. A rep in your part of Texas or Oklahoma supports you through startup.
- Data center projects nationwide. We support G&W switchgear, CLiP protectors and source transfer on data center projects anywhere in the U.S.
Related guides: Solid dielectric vs. SF6 switchgear · What is a recloser? · What is a current limiting protector? · What is FLISR?
Your G&W Electric rep
Central/South Texas: Chad Ryan, Shane Ryan, Brent Tucker · Gulf Coast: Ryan Vinson · North Texas & Oklahoma: Jared Vanlandingham · West Texas: Derek Jones. Find your rep
Frequently asked questions
Who is the G&W Electric rep in Texas?
Ryan Sales is the G&W Electric representative in Texas and Oklahoma. Jack and Piper Ryan founded the company in 1984 to sell G&W in Texas, and regional reps now cover Central/South Texas, the Gulf Coast, North Texas and Oklahoma, and West Texas. Call (281) 363-1106 or find your rep.
Can I buy G&W Electric equipment directly from Ryan Sales?
Ryan Sales is a manufacturers' representative: we handle application support, quotes and lead-time answers, and G&W builds and ships the equipment. We stay with the project through startup. Request a quote with your ratings or one-line.
Does Ryan Sales handle G&W for data center projects outside Texas?
Yes. We serve utility, industrial and contractor customers in Texas and Oklahoma and take data center projects nationwide, including G&W switchgear, current-limiting protection and automatic source transfer. Send us the site location and equipment list to start.
Talk to a G&W Electric rep
Send us your specification or one-line for G&W options and current lead times. Call (281) 363-1106 or request a quote.