Tie Top Silicone Polymer Line Post Insulators
The ARP Tie Top C-Neck / F-Neck is a 15–69 kV silicone polymer line post insulator for tie-wire conductor attachment on distribution line post construction, sold and supported in Texas and Oklahoma by Ryan Sales.
- 15/25/35/46/69kV classes
- C or F neck (15-25kV) and F neck (35-69kV)
- anodized cast aluminum top fitting
- galvanized forged steel bottom fitting
- epoxy resin fiberglass rod
Overview
ARP tie top line posts come in 'C' or 'F' neck styles at 15kV and 25kV and 'F' neck at 35kV, 46kV and 69kV. Construction pairs electrical-grade silicone rubber sheds with an epoxy resin fiberglass rod, an anodized cast aluminum top fitting and a galvanized forged steel bottom fitting. They are compatible with ARP-GBH horizontal and ARP-GBV vertical steel gain bases.
Specifications
| Voltage class | 15 / 25 / 35 / 46 / 69 kV |
|---|---|
| Configuration | C or F neck (15–25 kV); F neck (35–69 kV) |
| Insulation | Electrical-grade silicone rubber sheds |
| Core rod | Epoxy resin fiberglass |
| Top fitting | Anodized cast aluminum |
| Bottom fitting | Galvanized forged steel |
| Compatibility | ARP-GBH / ARP-GBV gain bases |
Ratings from manufacturer data. Confirm your configuration with a rep.
Applications
- Tie-wire conductor attachment on distribution line post construction
Spec sheets & documents
Frequently asked questions
Who sells the ARP Tie Top Silicone Polymer Line Post Insulators in Texas?
Ryan Sales, a manufacturers' representative based in Magnolia, Texas, sells the ARP Tie Top Silicone Polymer Line Post Insulators and supports customers across Texas and Oklahoma through regional reps. Call (281) 363-1106 or request a quote on this page.
What neck styles and voltage classes do ARP tie top line post insulators come in?
ARP tie top line posts come in C or F neck styles at 15 kV and 25 kV, and in F neck only at 35 kV, 46 kV and 69 kV. They are used for tie-wire conductor attachment on distribution line post construction.
What gain bases work with ARP tie top line post insulators?
They are compatible with the ARP-GBH horizontal and ARP-GBV vertical steel gain bases. Each insulator has an anodized cast aluminum top fitting, a galvanized forged steel bottom fitting, an epoxy resin fiberglass rod and electrical-grade silicone rubber sheds.
Also in Polymer Insulators
View all →
ARP27kV Specialty Horizontal Dead End Insulator27kVCompact 27kV silicone polymer insulator that replaces two 10-inch porcelain disk assemblies in horizontal dead end applications.
ARP27kV Specialty Insulator with Clevis Pin27kVThe 27kV horizontal specialty polymer insulator supplied complete with ARP's clevis pin hardware.
ARPClevis Pin with Self-Contained Sliding Lock15kV - 69kV (insulator range)Clevis pin with a self-contained sliding lock for ARP dead end suspension insulators from 15kV to 69kV.