Encapsulated Current Limiting Fuses
The G&W Electric EPOX Encapsulated Fuse is a 15–25kV submersible current limiting fuse for padmount, vault and subsurface transformer protection, sold and supported in Texas and Oklahoma by Ryan Sales.
- 15.2/26.3kV Gnd-Y
- 125kV BIL
- 10-125A continuous
- IEEE C37.40
- C37.41
Overview
G&W's encapsulated fuses seal an X-Limiter full-range current limiting fuse inside a rugged void-free epoxy housing, making them fully submersible for vault and subsurface transformer protection. Two- and three-position designs with IEEE 200A bushing well interfaces, integral parking stands and hold-down straps simplify installation and fuse replacement in tight spaces, with no derating required.
Specifications
| Voltage class | 15.2 / 26.3 (Gnd-Y) kV |
|---|---|
| BIL | 125 kV |
| Continuous current | 10–125 A |
| Configuration | Two- and three-position |
| Interface | IEEE 200A bushing well |
| Submersible rating | Fully submersible |
| Enclosure | Void-free epoxy encapsulation |
| Standards | IEEE C37.40 / C37.41 / C37.47 / IEEE 386 |
Ratings from manufacturer data. Confirm your configuration with a rep.
Applications
- Padmount vault and subsurface transformer protection
- Space-constrained underground installations
Spec sheets & documents
Frequently asked questions
Who sells the G&W Electric Encapsulated Current Limiting Fuses in Texas?
Ryan Sales, a manufacturers' representative based in Magnolia, Texas, sells the G&W Electric Encapsulated Current Limiting Fuses and has represented G&W Electric in Texas since 1984. Its regional reps support customers across Texas and Oklahoma. Call (281) 363-1106 or request a quote on this page.
What makes the G&W Electric EPOX encapsulated fuse suitable for vault and subsurface installations?
The EPOX fuse seals an X-Limiter full-range current limiting fuse inside a void-free epoxy housing, making it fully submersible for padmount vault and subsurface transformer protection with no derating required. Two- and three-position designs with integral parking stands and hold-down straps simplify installation and fuse replacement in tight spaces.
What ratings and standards apply to the G&W Electric EPOX encapsulated fuse?
The EPOX encapsulated fuse is rated 15.2/26.3 kV Grounded-Y with 125 kV BIL and 10 to 125 A continuous current. It is designed to IEEE C37.40, C37.41 and C37.47, and it uses IEEE 200 A bushing well interfaces per IEEE 386.
Also in Current-Limiting Fuses & Protectors
View all →
G&W ElectricCLiP Current Limiting Protector2.8-38kVElectronically triggered current limiting protector interrupting up to 120kA in less than a quarter cycle.
G&W ElectricCLiP-LV Low Voltage Current Limiting Protector750VElectronically sensed low-voltage current limiter clearing faults up to 200kA in a quarter to half cycle.
G&W ElectricHigh Current Limitersup to 38kVBackup current limiters with 120kA interrupting for series application with lower-rated interrupters.