600A 35kV R-Stack Arrester
The Richards MFG 600A 35kV R-Stack Arrester (63RSA) is a 35 kV deadbreak elbow surge arrester for protecting underground cables and equipment and renewable energy collection systems, sold and supported in Texas and Oklahoma by Ryan Sales.
- 600A
- 35kV class
- corona 26kV
- AC withstand 50kV/1 min
- BIL 150kV
Overview
The 600A 35kV R-Stack Arrester molds a male deadbreak interface directly into an elbow arrester housing, eliminating the loadbreak arrester, reducing tap plug, connecting plug and bushing extender normally required. Gapless Metal Oxide Varistor technology is housed in a fully shielded, submersible EPDM housing. The bolted connection supports higher fault currents than 200A loadbreak alternatives.
Specifications
| Voltage class | 35 kV |
|---|---|
| Continuous current | 600 A |
| Symmetrical fault current | 40 kA |
| BIL | 150 kV |
| AC withstand | 50 (1 min) kV |
| Corona voltage | 26 kV |
| Configuration | Gapless metal oxide varistor (MOV) |
| Insulation | Fully shielded, submersible EPDM housing |
| Standards | ANSI/IEEE Std 386, IEEE Std C62.11 |
Ratings from manufacturer data. Confirm your configuration with a rep.
Applications
- Surge protection of underground cables and equipment
- Renewable energy collection systems
Spec sheets & documents
Frequently asked questions
Who sells the Richards MFG 600A 35kV R-Stack Arrester in Texas?
Ryan Sales, a manufacturers' representative based in Magnolia, Texas, sells the Richards MFG 600A 35kV R-Stack Arrester and supports customers across Texas and Oklahoma through regional reps. Call (281) 363-1106 or request a quote on this page.
What components does the 63RSA R-Stack Arrester eliminate?
The 63RSA molds a male deadbreak interface directly into an elbow arrester housing, eliminating the loadbreak arrester, reducing tap plug, connecting plug and bushing extender normally required. Its bolted connection supports higher fault currents than 200 A loadbreak alternatives, with a 40 kA symmetrical fault rating per IEEE 386.
What surge protection technology and standards does the 600A 35kV R-Stack Arrester use?
It uses gapless metal oxide varistor (MOV) technology in a fully shielded, submersible EPDM housing. The arrester meets ANSI/IEEE Std 386 and IEEE Std C62.11, is rated 600 A in the 35 kV class with a 150 kV BIL, and suits underground cables, equipment and renewable energy collection systems.
Also in Separable Connectors & Elbows
View all →
Richards MFG200A Loadbreak Elbow15kV200A class loadbreak elbow for hot-stick load break and load make operations on 15kV underground systems.
Richards MFG600/900A Deadbreak Accessories15kV/25kV/35kVComplete accessory family for 600/900A deadbreak systems covering insulating, testing, grounding and circuit expansion.
Richards MFG600/900A Deadbreak Elbow15kV/25kV/35kVFully shielded 600A/900A deadbreak elbow for terminating and splicing primary underground cable through 35kV.