Bushing Extender R-800
The Richards MFG Bushing Extender R-800 (618BEF) is a 15 and 25 kV factory-molded 600/900A deadbreak bushing extender with an integrated 200A loadbreak tap for loadbreak elbows and surge arresters, sold and supported in Texas and Oklahoma by Ryan Sales.
- 200A continuous
- short-time 10kA/10 cyc & 3.5kA/3s
- 15/25kV
- IEEE 386
- corona 11/19kV
Overview
The Bushing Extender R-800 merges a 200A loadbreak tap with a 600/900A deadbreak bushing extender into one factory-molded and factory-tested unit. Consolidation reduces installation cost while improving reliability and quality. It accepts 200A loadbreak elbows, surge arresters and insulating caps for voltage-indication testing.
Specifications
| Voltage class | 15 / 25 kV |
|---|---|
| Continuous current | 200 A |
| Deadbreak interface | 600 / 900 A |
| Short-time withstand | 10 for 10 cycles / 3.5 for 3 s kA |
| BIL | 95 / 125 kV |
| AC withstand | 34 / 40 kV |
| Corona voltage | 11 / 19 kV |
| Standards | IEEE 386 |
Ratings from manufacturer data. Confirm your configuration with a rep.
Applications
- 200A loadbreak elbow installation
- 200A surge arrester mounting
- Insulating cap test points
Spec sheets & documents
Frequently asked questions
Who sells the Richards MFG Bushing Extender R-800 in Texas?
Ryan Sales, a manufacturers' representative based in Magnolia, Texas, sells the Richards MFG Bushing Extender R-800 and supports customers across Texas and Oklahoma through regional reps. Call (281) 363-1106 or request a quote on this page.
What does the Bushing Extender R-800 combine in one unit?
The 618BEF combines a 200 A loadbreak tap and a 600/900 A deadbreak bushing extender in a single factory-molded, factory-tested unit. Consolidating the two reduces installation cost compared with separate components. It is available in 15 kV and 25 kV classes and meets IEEE 386.
What can connect to the loadbreak tap on the Bushing Extender R-800?
The 200 A loadbreak tap accepts 200 A loadbreak elbows, surge arresters and insulating caps used for voltage-indication testing. The tap is rated 200 A continuous, with short-time ratings of 10 kA for 10 cycles and 3.5 kA for 3 seconds.
Also in Separable Connectors & Elbows
View all →
Richards MFG200A Loadbreak Elbow15kV200A class loadbreak elbow for hot-stick load break and load make operations on 15kV underground systems.
Richards MFG600/900A Deadbreak Accessories15kV/25kV/35kVComplete accessory family for 600/900A deadbreak systems covering insulating, testing, grounding and circuit expansion.
Richards MFG600/900A Deadbreak Elbow15kV/25kV/35kVFully shielded 600A/900A deadbreak elbow for terminating and splicing primary underground cable through 35kV.