Deadbreak Elbow Extension Adapter
The Richards MFG Deadbreak Elbow Extension Adapter (P625DE / 35DE) is a 15 to 35 kV molded bus adapter for equipment extension and live-front to dead-front conversions, sold and supported in Texas and Oklahoma by Ryan Sales.
- 600/900A
- 15/25/28kV standard, 35kV custom
- IEEE 386
- AC withstand 34-50kV
- BIL 95-162kV
Overview
The Deadbreak Elbow Extension Adapter is a specialized bus that interfaces a deadbreak elbow housing on one end and a disconnectable joint sleeve on the other. It enables connections between switchgear or transformer bushings and power cables during equipment extension, replacement and live-front to dead-front conversions. The aluminum contact is overmolded with peroxide-cured EPDM rubber.
Specifications
| Voltage class | 15 / 25 / 28 (standard); 35 (custom) kV |
|---|---|
| Continuous current | 600 / 900 A |
| BIL | 95–162 kV |
| AC withstand | 34–50 kV |
| Insulation | Injection-molded peroxide-cured EPDM |
| Material | Aluminum contact |
| Standards | IEEE 386 |
Ratings from manufacturer data. Confirm your configuration with a rep.
Applications
- Equipment extension and upgrades
- Live-front to dead-front conversion
- Damaged cable or accessory replacement
Spec sheets & documents
Frequently asked questions
Who sells the Richards MFG Deadbreak Elbow Extension Adapter in Texas?
Ryan Sales, a manufacturers' representative based in Magnolia, Texas, sells the Richards MFG Deadbreak Elbow Extension Adapter and supports customers across Texas and Oklahoma through regional reps. Call (281) 363-1106 or request a quote on this page.
What is the Deadbreak Elbow Extension Adapter used for?
The adapter connects switchgear or transformer bushings to power cables during equipment extension, replacement and live-front to dead-front conversions. It is a molded bus with a deadbreak elbow housing on one end and a disconnectable joint sleeve on the other, and it is also used when replacing damaged cable or accessories.
What voltage classes are available for the P625DE / 35DE Deadbreak Elbow Extension Adapter?
The adapter is standard in 15 kV, 25 kV and 28 kV classes, with 35 kV available as a custom build. It is rated 600/900 A, meets IEEE 386, and is made of injection-molded, peroxide-cured EPDM over an aluminum contact.
Also in Separable Connectors & Elbows
View all →
Richards MFG200A Loadbreak Elbow15kV200A class loadbreak elbow for hot-stick load break and load make operations on 15kV underground systems.
Richards MFG600/900A Deadbreak Accessories15kV/25kV/35kVComplete accessory family for 600/900A deadbreak systems covering insulating, testing, grounding and circuit expansion.
Richards MFG600/900A Deadbreak Elbow15kV/25kV/35kVFully shielded 600A/900A deadbreak elbow for terminating and splicing primary underground cable through 35kV.