CSH Series Cold Shrink Hammerhead
The Richards MFG CSH Series is a 15, 25 and 35 kV cold shrink hammerhead T-body for medium voltage underground cable termination and splicing, sold and supported in Texas and Oklahoma by Ryan Sales.
- 600A (Al)/900A (Cu) continuous
- 15/25/35kV classes
- short-time 25kA/10 cyc (Al), 40kA/10 cyc (Cu)
- IEEE 386
- BIL 95/125/150kV
Overview
The CSH Series Cold Shrink Hammerhead integrates three components into one design, combining termination and splicing capabilities for medium voltage power cable. It installs without separate cable adapters and features an integral jacket seal, greaseless core and 100% EPDM molded construction. The connector is fully shielded, submersible and designed and manufactured in the USA.
Specifications
| Voltage class | 15 / 25 / 35 kV |
|---|---|
| Continuous current | 600 (Al) / 900 (Cu) |
| Short-time withstand | 25 for 10 cycles (Al) / 40 for 10 cycles (Cu) kA |
| BIL | 95 / 125 / 150 kV |
| AC withstand | 34 / 40 / 50 kV |
| Insulation | 100% EPDM |
| Jacket seal | Oil-resistant, integrated |
| Test point | Optional capacitive test point |
| Standards | IEEE 386 |
Ratings from manufacturer data. Confirm your configuration with a rep.
Applications
- Medium voltage underground cable termination and splicing
- Transformer and switchgear connections
Spec sheets & documents
Frequently asked questions
Who sells the Richards MFG CSH Series Cold Shrink Hammerhead in Texas?
Ryan Sales, a manufacturers' representative based in Magnolia, Texas, sells the Richards MFG CSH Series Cold Shrink Hammerhead and supports customers across Texas and Oklahoma through regional reps. Call (281) 363-1106 or request a quote on this page.
How does the CSH Series Cold Shrink Hammerhead simplify installation?
The CSH Series combines three components into one design, joining termination and splicing in a single cold shrink T-body. It installs without separate cable adapters and has an integral, oil-resistant jacket seal and a greaseless core. Construction is 100% molded EPDM, and it is designed and manufactured in the USA.
What voltage classes and ratings does the CSH Series Cold Shrink Hammerhead cover?
The CSH Series is offered in 15 kV, 25 kV and 35 kV classes, rated 600 A continuous in aluminum and 900 A in copper. BIL ratings are 95, 125 and 150 kV, and it meets IEEE 386. The connector is fully shielded and submersible, with an optional capacitive test point.
Also in Separable Connectors & Elbows
View all →
Richards MFG200A Loadbreak Elbow15kV200A class loadbreak elbow for hot-stick load break and load make operations on 15kV underground systems.
Richards MFG600/900A Deadbreak Accessories15kV/25kV/35kVComplete accessory family for 600/900A deadbreak systems covering insulating, testing, grounding and circuit expansion.
Richards MFG600/900A Deadbreak Elbow15kV/25kV/35kVFully shielded 600A/900A deadbreak elbow for terminating and splicing primary underground cable through 35kV.